With the development of the 21st century, people's living standards are getting higher and higher Well covers are often seen on urban roads. What should be paid attention to when installing stainless steel well covers? Let's follow Chongqing Well Cover Company to have a look.

1. The clear hole diameter of the shaft shall not be greater than the clear hole of the well frame, so as to avoid accidents caused by the suspension of the well frame due to load. At the same time, the relative height between the product plane and the surrounding ground should be within+2~- 2mm.

2. When installing the stainless steel manhole cover, the construction personnel should be careful not to be bored with the installation. If the front is facing down, the follow-up will not be possible. Chongqing Well Cover Company believes that even if the installation is successful, the well cover will lose its practicability, aesthetics and engineering quality assurance.

3. After installation, the construction personnel shall use concrete or other fixtures to fix the edge of the stainless steel manhole cover to keep it fixed.

4. During welding, argon fluoride welding process shall be used. Because it is stronger than traditional electric welding. Of course, in order to increase the bearing point of the manhole cover, V-shaped angle steel should be used at the bottom to improve the standard bearing of the manhole cover.

That's enough for the installation of stainless steel manhole cover. I hope it will be helpful to you. If you need anything, please consult Chongqing Well Cover Company.